The main task of any greenhouse is to create optimal temperature and humidity conditions for growing the maximum possible volume of vegetables, fruits and herbs in a given area. To achieve the creation of such conditions is possible only with the use of high-quality coating. Moreover, the greenhouse coating material should have the smallest specific gravity. Otherwise you will have to use a heavy frame and equip a full-fledged foundation under the structure. For this reason, polycarbonate is predominantly used in the design of greenhouses today.
Cellular or solid polycarbonate type
Cellular polycarbonate becomes a better choice for greenhouse cladding. This material has a hollow structure and, as a result, a lower specific gravity. With an identical sheet thickness, cellular polycarbonate weighs several times less than a solid one, which allows the use of a lightweight frame and a simple foundation.
In addition, the cellular structure of polycarbonate panel also contributes to a decrease in the thermal conductivity. In practice, this translates into the ability of the material to retain heat indoors for longer.
How to choose cellular polycarbonate for greenhouse
So, we have decided on the type of polycarbonate for greenhouse shed. Now you need to understand the consumer characteristics of the sheets. The quality of this material is determined by several important parameters:
- Mechanical strength;
- Resistance to temperature extremes;
- Thermal conductivity;
- Light transmittance;
- Degree of UV protection.
The cover of the greenhouse must withstand the average snow and wind loads in your area. At the same time, it must transmit a sufficiently large amount of light, cutting off harmful ultraviolet radiation. And, of course, the thermal insulation qualities of polycarbonate should contribute to the longest retention of heat inside the greenhouse, otherwise you may face increased heating costs.
There are dozens of brands on the market today. If you are installing a greenhouse for the first time, we advise you to choose well-known brands of polycarbonate manufactures with a sheet thickness of 4-6 mm with good UV protection.
In many ways, the reliability of the skin depends on the quality of the raw materials and compliance with the technological process in the manufacture of the material. In order not to worry about the correct choice and not waste time studying the market, you can purchase a ClimaPod Greenhouse. Any ClimaPod Greenhouse Kit includes high-quality twin wall cellular polycarbonate sheets with UV protection 4 or 6 mm thick.
